1. Precautions for handling mechanical arm

Lifting can be used before transportation.

During transportation, note the following: Before moving the robot, ensure that all devices are securely tied and that they do not shake. Check the load-bearing capacity of the truck and equipment to be moved.

2. Precautions for the installation of mechanical arm

The biggest difference between ROBOT and other machines is that it has arms and joints, which can make movements with high degrees of freedom and extend to any Angle and space. But it also makes robots more dangerous than other automation devices. Therefore, security measures must be considered in the entire automation system equipment.

3. Safety measures taken during the installation of the mechanical arm

1) Use warning lights or other facilities to let personnel know that the ROBOT is in operation;

2) Set security fence around the system. When personnel enter the robot work area, they must enter through the security gate. When the security gate is opened, the system will stop

3) Set the emergency stop button in the place immediately accessible by the operator.

4. Maintenance of mechanical arm

ROBOT must be scheduled to perform maintenance and inspection, and each repair or inspection personnel must be professionally supervised by FANUC. Care and maintenance should be noted as follows:

1) The power supply must be turned off during maintenance. If it must be powered on for maintenance, please press the emergency stop button;

2) Before disassembling any case, read the disassembly process description of relevant manual in detail;

3) Before entering the robot workspace, confirm the security in the area;

4) Replacement parts, please choose FANUC recommended specifications to replace;

5) If you want to disassemble and click, please make support facilities for robot arm in advance to avoid falling robotic arm;

5. If the robot or system must be operated during maintenance, please note the following:

1) Confirm the safe escape path, pay attention to the actions of the system and robot at any time during operation, and confirm that the escape path is not hindered;

2) Increase alertness at any time and be ready to press the emergency stop;

3) When maintaining important parts such as motor and reducer, there must be other facilities to support the weight and avoid damaging personal safety;

4) When the lubricating oil spills onto the ground, wipe it immediately;

5) It is strictly prohibited to step on the ROBOT